Saturday, May 31, 2014

DIY Bug repellent

So, as I mentioned in my post for my DIY citronella candles, I use several different things to keep pesky critters away from me so I can enjoy my outdoor space sans bug bites. Along with my candles, I usually use some sort of bug repellant spray-Off, Skintastic, you know the kind. But again, the stuff is expensive. So, why not make my own-I can SO do that!


This is what I used:

Spray bottle-any you have on hand will do

Microwaveable cup/bowl

Funnel

Water

Witch hazel

Citronella essential oil

Lemongrass essential oil

Lavender essential oil

In a glass Pyrex measuring cup, I boiled not quite a cup of water in the microwave, then using a funnel, I poured it into my spray bottle until it was half full. Then, I added witch hazel til the bottle was just shy of full. Then, I added the essential oils-approximately 20 drops citronella, 10 drops lavender and 5 drops lemongrass. Give it a shake, and you're good to go. 


Works as good as the store bought, and smells great!  You can use other essential oils, just domsome research on he properties of the different oils out there, and add any scent you like as well. 

Don't let pesky critters keep you from enjoying some quiet outdoor time, between DIY citronella candles, and DIY bug spray, you're all set to spend an evening bite-free. 



Friday, May 30, 2014

DIY Citronella candles




Living in the South, one thing is a given during the warm weather-Mosquitos!  We recently re-built our deck (that post coming soon), and love spending nice evenings sitting outside, but having mosquito repellent is a must!  I use lots of several different options to repel these pesky critters, Citronella candles being one of my favorite.  They smell wonderful, they provide just the right soft light, and they add a homey, decorative touch to our outdoor space. BUT-they can be costly! And, we are on a t-i-g-h-t budget.  So, being the DIYer that I am, I said "I can do that". So, I did. 

What I used:

Soy wax flakes-I bought this 2lb bag at Hobby Lobby, $5 with my coupon. You can also find wax online at Amazon, Bulk Apothecary or any number of sites. 

Tin containers-I bought these at Dollar Tree, love, love, LOVE the color. You can use any container that is heat safe, Mason jars work great too. We have 3 big dogs who like to run and play, and inevitably they knock stuff over, so to be safe I prefer non-breakable containers. And, these were the perfect size and, did I mention I love the color?!?

Soy wax candle wicks w/ tabs-shop around, you can get these at craft stores or online, just make sure you get the right size wick for your container size-the package should have a chart, or the online site should have a chart. 

Essential oils-I used Citronella and lavender, both of which have mosquito repellant properties. You can also use lemongrass, tea tree and other oils for fragrance. Or, if you just want a scented candle, you can use any essential oil with or without pesky critter repelling properties. 

Wax melter-I got mine at Michaels, $10 with coupon, you can also use a double boiler or a metal bowl sitting on top of a small pot of boiling water. I like the wax melter because it has the handy pour spout. 

Wax color chips- I got mine at the Flaming Candle Company

Hot glue gun

Popsicle sticks and rubber bands





I start by putting wax flakes into the melter, I just guesstimated how much I neede-and came up short, but I'll explain that later. Turn the stove on low-mine was set on 3-4 to get the wax melted. You don't want it to get too hot, let it melt slowly, and stir frequently.  While the wax is melting, plug in your hot glue gun, and let it heat up. Keep stirring the wax!  Once your glue gun is ready, put a little on the bottom of your wick tab, and place the tab in the center of your container. Note: my containers are oval shaped, longer than wider.  I decided to use 2 wicks in these, just to be sure they would burn well. Press the wick tab down firmly to the bottom of your container-I used a Popsicle stock to do this. Now, let the glue dry, and go stir the wax some more.  



Once the wax is melted, turn the stove temp down, I turned mine all the way down to the lowest setting and add your wax color chips. I added 2 wax color chips, and stirred them into the wax as they melted, you use as many as you want for your desired color. Note-the color will lighten up as the wax cools. **Sidebar- when I first started trying my hand at making my own candles, I was brave and tried using crayons to color them. While they turned out very pretty, and I love the huge amount of color choices AND they are a super cheap option for coloring candles, I found that the candles did not burn very well. Now, I'm sure there is some chemistry involved here, probably some simple combination of ingredients that I could change. I'm thinking the melt point of the wax in the crayons is too different from the melt point of the soy wax, who knows, I'm no chemist. I'll keep playing around with the concept, but for now I broke down and bought some of the wax color chips**. Then turn the stove off but leave the melter on the eye. I put wax paper on the counter under my containers, you never know when you'll spill some, or some of the tin containers may not be completely sealed all the way around and may leak slightly. I do mean slightly, I found very thin rings of wax under my first ones, so l learned the hard way. It's an easy clean up, but y'all know the saying about an ounce of prevention. 

While the wax is cooling just a bit, you need to secure your wicks to make sure they stay straight when you pour the wax. There are all kinds of ways to do this, include fancy-smancy wick holders. But, I've found the 2 Popsicle sticks and 2 small rubber bands work just fine, plus I already had them on hand, lots of them. So, I'll explain the Popsicle stick/rubber band option. Place a small rubber band around 1 end of 2 Popsicle sticks stacked together. Then, using your finger, separate the 2 sticks and slide over the wick-don't worry about moving the wick, it's glued down, remember?  Move the sticks and wick until you have the wick centered straight, then gently put a second rubber band around the other end of the 2 sticks. If your container is too wide for Popsicle sticks, you can use chop sticks, skewers, silverware, you get the picture. 


This step will take only a few seconds, at least once you get used to it. When you're done, it's time to add the essential oils to the wax. I used 50 drops of Citronella oil, and 25 drops of lavender oil. Why so much, you ask?  It's just me. I like a strong scent. Most folks would say no more than 20 drops citronella and 10 drops lavender.  I march to the beat of my own drum, or as The 6' Wonder likes to say, "you're weird". Stir the scent in, then you're ready to pour your very own citronella candle. Note: keep track of the number of drops of each oil you use, it may come in handy a little later. 

Carefully, slowly, pour the melted wax into your container. Keep an eye on the wick watching for movement. Sometimes, the hot wax will melt the glue and it will come loose. Don't worry if it does, just center it again, stabilize it and let the small amount of wax you've poured already set for a little bit. If you have to do this, I recommend turning the stove back on low and set the melter back on it to keep it melted. If your wick stays in place, continue pouring until you fill the container almost to the top, I leave about a 1/4 inch space at the top of mine. Now, if you short pour, like me, just add some more wax to your melter, let it melt and repeat the stirring, coloring and scenting steps above, see I told ya to keep track of how many drops of the essential oils you used, I learned this the hard way too-notice the pattern? Once the wax melts, just pour it on top of what you've already poured. If I were using glass containers, this option could cause the candle to show lines and look imperfect.  To me, that's no problem, especially since I'm using tin containers. If you're using glass, and want perfection, you'll want to either a) do better than me at measuring the amount of wax you'll need or, b) reheat the original batch of wax with the additional wax so that it's all the same temp when you pour it. 



Now comes the hardest part-just sit back and wait!  These babies need to cool for at least 8 hours, or mine did, but these are fairly large candles. Just wait until the wax isn't soft, the container is cool, and it all looks solid. 





Once cooled, remove the Popsicle sticks, trim the wicks down to about a half inch, and then head out to your deck, patio, veranda, or balcony and enjoy a bug- free, or at least somewhat, evening. 



Night y'all!

ps remember how I said I use several different bug repelling options early in this post?  Well, check back in a few days and I'll show you how I made my own bug spray!










Thursday, May 8, 2014

DIY magnets


As I mentioned last week, daughter #1 recently moved into her own place.  Well, the air vent thingy in the hallway of her apartment is covered by a huge metal cover.  It doesn't look awful, it's painted to blend in with the wall. But, my creative self had an idea. Why not use it as a magnetic picture frame!?!  Get lots of cute magnets and the girls can hang pictures and notes on it, like most of us use our fridge for. Low and behold, she and her roommates loved the idea! Pretty cool, I can still impress twenty-something's!  Of course, she said "so mom you'll have to find me some really cute magnets". Again, my creative self said "I can MAKE them". I have all the stuff I need at home already. So, I left from painting the chevron wall (see previous post) and got busy gathering my supplies for an abundance of cute magnets. 


This thing. Perfect magnet board, FREE!


Here's what I used:


Magnets- I had buttons and strips
Large clear glass marbles/gems with flat backs
Scrapbook paper
Craft paint
Glitter
E6000 glue
Mod Podge-forgot to put that in the pic. 

I started with the marbles and some scrapbook paper. I picked a few patterns that I thought would look good, and laid the marbles flat side down on the paper to gauge how the pattern would look. Then I cut little squares of the paper making sure the part of the pattern I wanted could be centered on the marble. Then, I painted a layer of Mod Podge on the flat side of the marble and stuck it down onto the paper. 


Once the Mod Podge dried- you'll know when it's dry when you don't see any white through the front of your marble-I cut the excess paper off around the marble. Don't worry if you don't have perfect circles of paper, the marbles are forgiving in that way. Then I added a few extra coats of Mod Podge over the back of the paper just to get a good seal. 

This is a pic of the backs of the marbles while the Mod Podge dries. 

Here are the first ones that dried, by now I'm in love with them!


My girl is a glitter girl, so next I made some pink glitter ones. I painted the backs with Mod Podge, then sprinkled the glitter on them and pressed the glitter down well with my fingers, then just let it dry. 


After the Mod Podge dried on these, I sprayed them a couple of times with some spray clear polyurethane, just to harden the glitter really good. 

For all of these, my next step after all the paper and glitter was dry, was to put a dab of the e6000 glue on each one and press one of the magnet buttons onto them. Now, my magnet buttons had foam adhesive things on the back, I didn't remove those. I took off the paper that covered the sticky part, and just stuck them sticky side down onto the e6000. After a while, I noticed that the magnets weren't settling down into the glue well, so I put them all together on my table, magnet side down, and placed a heavy book on top of them. The added weight helped make sure the magnets adhered to the marbles well. 

And, here they are all done. 


I should note, the 4 gem-looking pink ones aren't the marbles.  I found this pack of pink gemstone embellishments on clearance at Hobby Lobby, and thought what the heck, stick a magnet on those too!  

Next, I moved on to the clothespin magnets. First, I painted them, front, sides and the insides with some craft glue the same color as the glitter I was using on them. Hey don't have to be perfect, I just wanted the background to be the same color as the glitter so it would blend better. 


After the paint dried, I put Mod Podge over the painted front side, the dipped it in the glitter. 


Then, set them out to dry. 


Once dry, I sprayed them with the clear polyurethane.  

She loves them, so I'm happy, happy happy!




















Tuesday, May 6, 2014

DIY Chevron wall

My oldest daughter recently moved into her new place-again. She wanted a chevron wall, so I spent some time on Pinterest looking at ideas and tutorials. I saw several people measured, marked, taped off the pattern on the wall.  That just seemed very time consuming to me. So, I started shopping for a large wall stencil with the pattern she wanted. 

I found this one on Royal Design Studio for $11.00!  It's a large one, think poster size, so we had to move it and match it up multiple times. It was really VERY easy! 



 Here are a few pics of the process.

Blank wall, drop cloth in place, ladder ready and of course my Diet Mt Dew! You can barely see it behind the red Solo cup, but there is a can of Martha Stewart stencil adhesive spray-if you attempt a project like this GET THIS STUFF !  It was a life saver. I also used painters tape, but the spray kept the stencil flat against the wall and helped prevent leaking. 


First one done!  Here, you will see 2 of the mistakes I made using this stencil. 1) across the top, those little triangles I didn't need. I wasn't thinking how they would look and they were there on the stencil just for matching up the pattern as we moved along. 2) when I started the second section, I didn't match the pattern correctly, see how the V pattern isn't right, and there is that small white line of blank space?  I should've overlapped the stencil pattern to match the V, which I corrected on the next section. Since I'd made these mistakes early, and since we didn't have any of the base color that was already on the wall, I had to continue in the same manner throughout the process. Oh well, she has little triangles at the top (and bottom, to keep it consistent) and she has one section all the way down the left hand side of the wall where the pattern is off. I'm still impressed with this being my first attempt at a project like this. 



Here I've completed the wall, and we're letting it dry overnight. This took me approximately 4 hours-it could've been quicker without my frequent breaks to feed my bad habit, and without the time I had to take off to go pick my younger daughter up from school. I do not recommend trying to do this alone. Although my daughter didn't paint much, she was very helpful in holding the stencil, or the paint while I climbed up and down the ladder. And, handing me paper towels as needed, and that was OFTEN!  Here are a few pics of the wall completed with her furniture and decor added. 




Some suggestions if you try this yourself:

-lots and lots of paper towels or wash cloths. Keep a couple of wet ones close by for your hands and for any drips. I found my hands were covered in paint because each time I placed the stencil I had to press it down to make sure it was flat. And, of course, since my hand had wet paint on them I inevitably got paint smudges where I didn't want them. 
-have a helper
-read and re-read the instructions that come with your stencil. I could've had a flawless wall had I done better at this. 
-accept imperfections!  I love it, she loves it-EVERYONE loves it, even with my mistakes! 
-if possible, have on hand some of the base paint color that will help cover any mistakes if you just HAVE to correct them. 

Now, go find a wall to paint and enjoy!  I'll be using this same stencil in out throne room eventually.